Click Here to Return to Commercial Playsystems

 

  DON'T PLAY ON ANYTHING LESS!

PlayFALL
The Optimum Surface for Children's Play Environments
Resilient Complies with ASTM F1292 Tests Non-Toxic Exceeds ADA Requirements Slip Resistant Porous for Drainage Easy to Install Low Maintenance Interlocking Pins
Meets ASTM F1292 tests, exceeds ADA requirements. Tough, resilient, long lasting, non-toxic, slip-resistant, porous for drainage, low maintainance, weatherproof. Easy to install with interlocking pins, can be installed over solid or packed surfaces. Ideal for rooftop areas.
Features and Technical Specifications Basic Series Construction   SBR & Pigment Surface   Textured / Porous - 12" grid pattern Thickness   1.75", 2.5", 3", 3.25", 4.25" Fall Heights   4', 6', 8', 9' Weight   19.6, 22.5, 25, 30 lbs per tile Size   24" x 24" Colours   Black, terra cotta, green EPDM Series Construction   EPDM Surface   Textured / Porous - 12" grid pattern Thickness   1.75", 2.5", 3", 3.25" Fall Heights   3', 5', 6', 8' Weight   19.6, 22.5, 25, 30 lbs per tile Size   24" x 24" Colours   Brown, yellow, lemon yellow, green, signal green, grey, blue grey, purple, blue, capri blue, red Edge Ramps - Basic or EPDM 40” x 8" - 1.75” thick, 11.5 lbs. ea. 40” x 9" - 2.5” thick, 18 lbs. ea. 40” x 10" - 3” thick, 22.8 lbs. ea. 40” x 10" - 3.25” thick, 23.8 lbs. ea.

PlayFALL rubber safety tiles provide the optimum fall safety for kids play environments. Install a PlayFALL surface and eliminate the need to fill in the holes, remove animal wastes and potentially dangerous hidden objects.

When kids play, they also fall, and that's where PlayFALL comes to the rescue. PlayFALL is designed to meet the stringent ASTM requirements for playground fall safety and is available in a variety of thicknesses to match the fall heights of most play equipment and events.

Created from recycled rubber, diverting tonnes of waste from landfills, PlayFALL Safety Tiles are durable, resilient and porous to allow free drainage, and available in three top finishes- our “Basic Series” of Black or Pigment colours, our "Planet Series" and our “EPDM Series” of custom colour EPDM granules.

PlayFALL Basic Series Close-Ups
Black		Green		Terra Cotta

 

PlayFALL Planet Series Close-Ups
Blue		Blue Green		Blue White		Blue Yellow		Green		Red

 

PlayFALL EPDM Series Close-Ups (Shown at 100% Coverage)
Signal Green		Green		Yellow		Lemon Yellow		Brown		Red
Grey		Blue Grey		Blue		Capri Blue		Purple

PlayFALL INSTALLATION

PlayFALL Safety Tiles are connected using an Interlocking Pin system in conjunction with a caulking type of adhesive. As per the diagram, PlayFALL is designed to be placed in an “offset Brick” grid pattern with alternating rows beginning with a half tile. PlayFALL's Interlocking System allows for the tiles to be installed equally well over either a hard surface sub-base such as concrete, or a well compacted granular surface. This easy installation method ensures a safe and secure play surface, while reducing preparation costs and minimizing maintenance visits.

PlayFALL ACCESSORIES

PLAYFALL ADHESIVE
Excellent moisture and heat resistance
Sizes: Available in 825 ml cartridges. 1 Part Adhesive - 1 and 5 gallons. 2 Part Adhesive - 1 and 5 gallons. PF825 adhesive will bridge gaps up to 3/8". Designed to bond rubber, it has a very predictable cure rate and thixotropic nature. Excellent moisture and heat resistance. Click Here for our Adhesives Page

PlayFALL Loose Fill Crumb Rubber:
Loose Crumb Rubber made from 100% Recycled Rubber providing a safe, resilient, non-abrasive surface for your play areas. Meets ASTM standard (1292-93) for 10’ fall height @ 6” depth. Easily installed and maintained over existing surfaces. Sold in bulk bags, 50 - 1000 lb. 1 sq. ft. @ 6” deep = 14 lbs. PlayFALLWear Pads
Eliminates ditches at the end of slides or under swings. A 1.75” tile and a .75” mat provides a 48” critical fall height. Also available in 4’ x 4’ x1.50” solid wear pads. Landscape Fabric - 36"x300' roll - For use over compacted aggregate. PlayFALL WARRANTY: Click Here for PDF (right click and "save target as" to download - requires Adobe Acrobat viewer.)
  PlayFALL INSTALLATION MANUAL: Click Here for PDF (right click and "save target as" to download - requires Adobe Acrobat viewer.)
  PlayFALL ARCHITECTURAL SPECIFICATIONS: Click Here for PDF (right click and "save target as" to download - requires Adobe Acrobat viewer.)
   

©2005 Canadian Playsystems Ltd.

Website created by Vancouver Design Works Ltd.